Indiana Permit Practice Test: Traffic Signals and Signs (2026)

20 questions. Tap an answer to check it.

From the official handbook, Published July 2026, Section 6 · Checked Oct 2026 · Not affiliated with the BMV. Indiana Driver's Manual

Question 1 of 20 · 0 correct
  1. Question 1 of 20

    What do red traffic signs tell drivers?

    Show answer and explanation

    Answer: A regulation that requires immediate action

    Red signs require immediate action to avoid threats to safety, like Wrong Way.

    Handbook: Section 6, p. 27

    Report a problem
  2. Question 2 of 20

    Fluorescent yellow-green signs warn drivers about what?

    Show answer and explanation

    Answer: Schools, pedestrians, bicycles, playgrounds and school bus routes

    That color is used near schools, pedestrians, bicycles, playgrounds and school bus routes.

    Handbook: Section 6, p. 27

    Report a problem
  3. Question 3 of 20

    What do orange traffic signs warn about?

    Show answer and explanation

    Answer: Temporary conditions such as road work

    Orange signs warn of temporary conditions, often construction and maintenance.

    Handbook: Section 6, p. 27

    Report a problem
  4. Question 4 of 20

    What kind of information do green signs give?

    Show answer and explanation

    Answer: Directions, exits and distances

    Green signs show permitted movements and guidance, such as exits and distances.

    Handbook: Section 6, p. 27

    Report a problem
  5. Question 5 of 20

    A blue sign along the highway shows what?

    Show answer and explanation

    Answer: Road services, such as food or lodging at the next exit

    Blue signs display road services and information.

    Handbook: Section 6, p. 27

    Report a problem
  6. Question 6 of 20

    What do brown signs point out?

    Show answer and explanation

    Answer: Recreational and cultural interest sites

    Brown signs mark places like state parks.

    Handbook: Section 6, p. 27

    Report a problem
  7. Question 7 of 20

    White signs with black letters usually show what?

    Show answer and explanation

    Answer: Regulations you must obey, such as speed limits

    White signs display traffic regulations such as speed limits.

    Handbook: Section 6, p. 27

    Report a problem
  8. Question 8 of 20

    You face a green arrow shown with a red light. What may you do?

    Show answer and explanation

    Answer: Turn in the direction of the arrow if the intersection is clear

    A green arrow gives you the right of way to turn when the intersection is clear.

    Handbook: Section 6, p. 34

    Report a problem
  9. Question 9 of 20

    The light turns steady yellow and you are too close to stop safely. What should you do?

    Show answer and explanation

    Answer: Complete your movement through the intersection

    If you can't stop safely, you may complete your movement.

    Handbook: Section 6, p. 33

    Report a problem
  10. Question 10 of 20

    What does a flashing yellow arrow for a turn mean?

    Show answer and explanation

    Answer: Turn only after yielding to pedestrians and oncoming traffic

    You may turn, but only after yielding.

    Handbook: Section 6, p. 34

    Report a problem
  11. Question 11 of 20

    A flashing red light at an intersection means the same as what?

    Show answer and explanation

    Answer: A stop sign

    Come to a complete stop, then proceed with caution.

    Handbook: Section 6, p. 34

    Report a problem
  12. Question 12 of 20

    What does a flashing yellow light (no arrow) at an intersection mean?

    Show answer and explanation

    Answer: Slow down and use caution

    Slow down and go through carefully; cross traffic must yield to you.

    Handbook: Section 6, p. 34

    Report a problem
  13. Question 13 of 20

    Before turning right on a red light (where allowed), what must you do first?

    Show answer and explanation

    Answer: Come to a full stop

    Stop fully, check for vehicles and pedestrians, look for a No Turn on Red sign and use the correct lane.

    Handbook: Section 6, p. 34

    Report a problem
  14. Question 14 of 20

    When may you turn left on a red light in Indiana?

    Show answer and explanation

    Answer: From a one-way street onto a one-way street, after a full stop

    Left on red is only from one-way to one-way, after stopping and checking.

    Handbook: Section 6, p. 34

    Report a problem
  15. Question 15 of 20

    A motorcyclist's signal won't change to green. When may they go through the steady red light?

    Show answer and explanation

    Answer: After a complete stop of at least two minutes, with caution

    Motorcycles and motor driven cycles may proceed after stopping at least two minutes; this does not apply to autocycles.

    Handbook: Section 6, p. 35

    Report a problem
  16. Question 16 of 20

    Approaching a red light, where must you stop if there is a solid white stop line?

    Show answer and explanation

    Answer: At the stop line

    Stop at the solid white stop line; if none, before the crosswalk; if no crosswalk, before the intersection.

    Handbook: Section 6, p. 35

    Report a problem
  17. Question 17 of 20

    When do rectangular rapid flashing beacons at a crosswalk flash?

    Show answer and explanation

    Answer: Only when a pedestrian activates them

    They are used at crosswalks and flash only when a pedestrian activates them.

    Handbook: Section 6, p. 34

    Report a problem
  18. Question 18 of 20

    A pedestrian hybrid beacon at a mid-block crosswalk is dark. What does that mean?

    Show answer and explanation

    Answer: No pedestrian has activated it; drive normally

    It stays dark until a pedestrian activates it.

    Handbook: Section 6, p. 36

    Report a problem
  19. Question 19 of 20

    What does a flashing DON'T WALK signal tell pedestrians?

    Show answer and explanation

    Answer: The time to cross safely is ending

    The flashing words or hand warn that crossing time is ending.

    Handbook: Section 6, p. 36

    Report a problem
  20. Question 20 of 20

    A signal with white rectangular bars controls which traffic?

    Show answer and explanation

    Answer: Buses or transit vehicles

    White bar signals apply only to bus or transit operators.

    Handbook: Section 6, p. 35

    Report a problem

Your score

0%

0 / 20

Review the explanations of the questions you missed.

Read the summary of Section 6 of the handbook →

More practice tests

Full exam and road signs

Practice tests

Tests by topic